Ryobi EHP 1340 Pressure Washer Manual

The Ryobi EHP 1340 is a powerful electric pressure washer designed for efficient cleaning of various surfaces. It features a 1400 PSI motor, adjustable spray nozzle, and a lightweight design for easy maneuverability. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 1400 PSI electric motor, adjustable spray nozzle, detergent tank, and ergonomic handle.

Feature	Description
1400 PSI Motor	Provides powerful cleaning performance
Adjustable Spray Nozzle	Allows for different spray patterns
Detergent Tank	Holds cleaning solution for enhanced cleaning
Lightweight Design	Easy to transport and maneuver
Ergonomic Handle	Provides comfort during use

Installation

Unpack the pressure washer and inspect all components. Place the unit on a stable surface.

Connect the water supply: Attach the garden hose to the water inlet.
Attach the spray wand: Secure the wand to the pressure washer.
Plug into an electrical outlet: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

Fill the detergent tank: Use a compatible cleaning solution.
Adjust the spray nozzle: Set to the desired spray pattern.
Test the pressure: Turn on the water supply and power on the unit.

CAUTION! Do not operate without water supply.

Specifications

Power: 1400 PSI, 1.2 GPM.
Motor: Electric, 120V.
Weight: 25 lbs.
Hose Length: 25 feet.
Detergent Tank Capacity: 1 liter.
Dimensions: 12 x 10 x 30 inches.

Controls and Settings

Access controls via the front panel. Key controls include the power switch, spray nozzle adjustment, and detergent tank.

Safety Features: Automatic shut-off, GFCI protection.

Connecting Accessories

Compatible accessories include various spray wands and brushes.

Turn off the pressure washer before connecting accessories.
Match the accessory to the spray wand.

Tip: Use the appropriate accessory for the task to ensure optimal performance.

Operating the Pressure Washer

Follow these steps to operate the pressure washer effectively.

Turn on the water supply.
Power on the unit.
Adjust the spray nozzle as needed.
Begin cleaning by directing the spray at the surface.

WARNING! Do not point the spray wand at people or pets.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter regularly.
Check hoses for leaks or damage.
Store in a dry place when not in use.

CAUTION! Unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check the power connection and outlet.
No water pressure	Clogged filter	Clean the water inlet filter.
Spray wand leaks	Loose connections	Tighten all connections securely.
Detergent not dispensing	Tank empty	Refill the detergent tank.

Service: For support, contact customer service at 1-800-RYOBI or visit www.ryobitools.com.