Ryobi RPW110B Pressure Washer Manual

The Ryobi RPW110B is a powerful electric pressure washer designed for efficient cleaning of various surfaces. With a maximum pressure of 110 bar and a flow rate of 370 liters per hour, it is ideal for cleaning patios, driveways, vehicles, and outdoor furniture. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 110 bar pressure output, 370 L/h flow rate, adjustable spray nozzle, integrated detergent tank, and a lightweight design for easy maneuverability.

Feature	Description
Adjustable Spray Nozzle	Allows for different spray patterns for various cleaning tasks
Integrated Detergent Tank	Holds detergent for enhanced cleaning power
Lightweight Design	Easy to transport and store
Power Cord	Long reach for convenience during operation
Wheels	For easy movement across surfaces

Installation

Unpack the pressure washer and check all components. Place the unit on a stable surface.

Connect the water supply: Attach the garden hose to the water inlet.
Connect the power supply: Plug the power cord into a suitable outlet.
Attach the spray gun and nozzle: Ensure they are securely connected.

WARNING! Ensure all connections are tight to prevent leaks. Do not operate without water supply.

First-Time Setup

Before first use, ensure all components are correctly assembled and connections are secure.

Fill the detergent tank if using detergent.
Turn on the water supply and check for leaks.
Plug in the power cord and switch on the unit.
Test the spray gun by pulling the trigger.

CAUTION! Do not point the spray gun at people or animals.

Specifications

Max Pressure: 110 bar.
Flow Rate: 370 L/h.
Power Rating: 1500W.
Weight: 12 kg.
Hose Length: 5 meters.
Power Cord Length: 10 meters.
Detergent Tank Capacity: 1 liter.

Controls and Settings

Access the power switch and adjustable spray nozzle settings. The spray gun features a trigger lock for safety.

Note: Always release the trigger when not in use to prevent accidental spraying.

Connecting Accessories

Compatible with various accessories for enhanced cleaning capabilities.

Turn off the unit before connecting accessories.
Ensure the accessory is compatible with the spray gun.
Securely attach the accessory before use.

Tip: Refer to the accessory manual for specific instructions.

Operating the Pressure Washer

Follow these steps for effective operation:

Turn on the water supply and plug in the unit.
Adjust the spray nozzle to the desired setting.
Pull the trigger to start spraying.
Release the trigger to stop.

WARNING! Do not operate the unit without water supply.

Maintenance and Care

Regular maintenance ensures optimal performance.

Check and clean the filter regularly.
Store the unit in a dry place when not in use.
Inspect hoses and connections for wear and tear.

CAUTION! Unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No pressure	Water supply issue	Check water supply and connections.
Unit won't start	Power supply issue	Check power cord and outlet.
Leaking water	Loose connections	Tighten all connections.
Inconsistent spray	Clogged nozzle	Clean or replace the nozzle.

Reset: Disconnect power and reconnect after a few minutes.