Ryobi RPW130S Pressure Washer Manual

The Ryobi RPW130S is a powerful electric pressure washer designed for efficient cleaning of various surfaces. With a maximum pressure of 130 bar and a flow rate of 390 liters per hour, it is ideal for cleaning patios, driveways, vehicles, and more. The unit features a lightweight design for easy maneuverability, a 5-meter high-pressure hose, and multiple nozzles for different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Electric motor, high-pressure hose, adjustable spray nozzle, detergent tank, and wheels for mobility.

Installation

Unpack the pressure washer and inspect all components. Place the unit on a stable surface.

1. Connect the high-pressure hose to the machine and the spray gun.
2. Attach the water supply hose to the inlet.
3. Fill the detergent tank if necessary.
4. Plug the power cord into a suitable outlet.

WARNING! Ensure all connections are secure before use.

First-Time Setup

Power on the pressure washer and follow the setup instructions.

1. Turn on the water supply and check for leaks.
2. Set the desired spray pattern using the adjustable nozzle.
3. Press the power button to start the motor.
4. Begin cleaning by pulling the trigger on the spray gun.

CAUTION! Always wear protective gear while operating.

Specifications

• Power: 1300W electric motor.
• Max Pressure: 130 bar.
• Flow Rate: 390 liters per hour.
• Hose Length: 5 meters.
• Weight: 12 kg.
• Detergent Tank Capacity: 1 liter.
• Noise Level: 85 dB.
• Dimensions: 30 x 25 x 70 cm.

Controls and Settings

The pressure washer features a simple control panel with an on/off switch, adjustable pressure settings, and a detergent application control.

Spray Gun: Trigger for activating water flow, safety lock to prevent accidental use.

Connecting Accessories

Compatible with various cleaning accessories such as brushes and extension wands.

1. Ensure the pressure washer is off before connecting accessories.
2. Match the accessory to the spray gun attachment.
3. Securely fasten the accessory before use.

Tip: Use the right accessory for the best cleaning results.

Operating the Pressure Washer

Follow these steps for effective operation:

1. Turn on the water supply and check for leaks.
2. Start the pressure washer and adjust the nozzle as needed.
3. Begin cleaning by pulling the trigger on the spray gun.
4. Release the trigger to stop the water flow.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance ensures optimal performance.

1. After use, disconnect the water supply and power.
2. Flush the system with clean water to remove detergent.
3. Store the unit in a dry place.

CAUTION! Do not store in freezing temperatures.

Safety Information

Read all safety instructions before use. Always wear protective gear, including gloves and goggles.

Troubleshooting

Reset: Disconnect power and reconnect to reset the unit.